Dice Roller

[Michael Pfaff]

Will this mod work on a 2.0.1 forum? I've got a new install for an RPG community (louisvillednd.com), and we'd like to do some dice rolling on there.

Would appreciate any feedback on how to get this installed.

Thanks!

[Prime32]

^ Works just fine by emulating 2.0 RC3 (click Advanced at the bottom-right of the Package Manager). If it works on 2.0 it should work on 2.0.1.


Anyway, when I installed this mod, a dozen users immediately began experimenting with it and found a way to fake a result:

Code Select Expand

[roll]{Attack Roll 1d20 : 20, total 20
Damage Roll} 1d6
Which would result in

Attack Roll 1d20 : 20, total 20
Damage Roll 1d6 : 3, total 3

I got around this by editing the mod so that the description was bold italic. Hence

Attack Roll 1d20 : 20, total 20
Damage Roll 1d6 : 3, total 3

which makes it obvious.

Apart from that, it's possible to edit out the "Tampered!" image.

[Michael Pfaff]

^ Works just fine by emulating 2.0 RC3 (click Advanced at the bottom-right of the Package Manager). If it works on 2.0 it should work on 2.0.1.


Anyway, when I installed this mod, a dozen users immediately began experimenting with it and found a way to fake a result:

Code Select Expand

[roll]{Attack Roll 1d20 : 20, total 20
Damage Roll} 1d6
Which would result in

Attack Roll 1d20 : 20, total 20
Damage Roll 1d6 : 3, total 3

I got around this by editing the mod so that the description was bold italic. Hence

Attack Roll 1d20 : 20, total 20
Damage Roll 1d6 : 3, total 3

which makes it obvious.

Apart from that, it's possible to edit out the "Tampered!" image.

Prime 32, where do I go to make this edit?

[Apllicmz]

Nice mod
when Update dont forget portuguese

[Prime32]

^ Works just fine by emulating 2.0 RC3 (click Advanced at the bottom-right of the Package Manager). If it works on 2.0 it should work on 2.0.1.


Anyway, when I installed this mod, a dozen users immediately began experimenting with it and found a way to fake a result:

Code Select Expand

[roll]{Attack Roll 1d20 : 20, total 20
Damage Roll} 1d6
Which would result in

Attack Roll 1d20 : 20, total 20
Damage Roll 1d6 : 3, total 3

I got around this by editing the mod so that the description was bold italic. Hence

Attack Roll 1d20 : 20, total 20
Damage Roll 1d6 : 3, total 3

which makes it obvious.

Apart from that, it's possible to edit out the "Tampered!" image.

Prime 32, where do I go to make this edit?

common.xml inside the ZIP, this is the relevant line:

Code Select Expand

$output .= (empty($thisdiceroll[2][$i]) ? $txt['dice_rolled'] : $thisdiceroll[2][$i] ) . ' ' . $qty_dice . 'd' . $type_dice . $thisdiceroll[5][$i] . $thisdiceroll[6][$i] . $thisdiceroll[7][$i] . $thisdiceroll[8][$i] . $thisdiceroll[9][$i] . ' : ';
So insert some formatting tags like so:

Code Select Expand

$output .= '[b][i]' . (empty($thisdiceroll[2][$i]) ? $txt['dice_rolled'] : $thisdiceroll[2][$i] ) . ' ' . $qty_dice . 'd' . $type_dice . $thisdiceroll[5][$i] . $thisdiceroll[6][$i] . $thisdiceroll[7][$i] . $thisdiceroll[8][$i] . $thisdiceroll[9][$i] . '[/i][/b] : ';

[Cereus]

Updated to 2.0.2 and added Portuguese Brazilian.

Hugs.

[Cereus]

I'm double posting because I found an error in my repack. I forgot to add the command to "install portuguese".

Hugs.

[Michael Pfaff]

I'm double posting because I found an error in my repack. I forgot to add the command to "install portuguese".

Hugs.

Arkhan, thanks for the update to 2.0.2. One error I noticed (and maybe something messed up with my install because I uninstalled the old dice roller and reinstalled), but when I click on the dice roller graphic in the new post, instead of popping up [roll][/roll] in the text field, it just does [roll].

Was this intentional? And, how can I adjust the code to make it do [roll] and [/roll] when someone clicks on the graphic?

[Michael Pfaff]

common.xml inside the ZIP, this is the relevant line:

Code Select Expand

$output .= (empty($thisdiceroll[2][$i]) ? $txt['dice_rolled'] : $thisdiceroll[2][$i] ) . ' ' . $qty_dice . 'd' . $type_dice . $thisdiceroll[5][$i] . $thisdiceroll[6][$i] . $thisdiceroll[7][$i] . $thisdiceroll[8][$i] . $thisdiceroll[9][$i] . ' : ';
So insert some formatting tags like so:

Code Select Expand

$output .= '[b][i]' . (empty($thisdiceroll[2][$i]) ? $txt['dice_rolled'] : $thisdiceroll[2][$i] ) . ' ' . $qty_dice . 'd' . $type_dice . $thisdiceroll[5][$i] . $thisdiceroll[6][$i] . $thisdiceroll[7][$i] . $thisdiceroll[8][$i] . $thisdiceroll[9][$i] . '[/i][/b] : ';

Thanks so much. So, I need to do this before I install, correct?

Is there any way to edit the output after install by modifying a subs file or something?

[Michael Pfaff]

I'm double posting because I found an error in my repack. I forgot to add the command to "install portuguese".

Hugs.

Arkhan, thanks for the update to 2.0.2. One error I noticed (and maybe something messed up with my install because I uninstalled the old dice roller and reinstalled), but when I click on the dice roller graphic in the new post, instead of popping up [roll][/roll] in the text field, it just does [roll].

Was this intentional? And, how can I adjust the code to make it do [roll] and [/roll] when someone clicks on the graphic?

Nvm. I think I got it. In the Subs-Editor, "'after' => '[/roll]'," was missing.

[Michael Pfaff]

common.xml inside the ZIP, this is the relevant line:

Code Select Expand

$output .= (empty($thisdiceroll[2][$i]) ? $txt['dice_rolled'] : $thisdiceroll[2][$i] ) . ' ' . $qty_dice . 'd' . $type_dice . $thisdiceroll[5][$i] . $thisdiceroll[6][$i] . $thisdiceroll[7][$i] . $thisdiceroll[8][$i] . $thisdiceroll[9][$i] . ' : ';
So insert some formatting tags like so:

Code Select Expand

$output .= '[b][i]' . (empty($thisdiceroll[2][$i]) ? $txt['dice_rolled'] : $thisdiceroll[2][$i] ) . ' ' . $qty_dice . 'd' . $type_dice . $thisdiceroll[5][$i] . $thisdiceroll[6][$i] . $thisdiceroll[7][$i] . $thisdiceroll[8][$i] . $thisdiceroll[9][$i] . '[/i][/b] : ';

Thanks so much. So, I need to do this before I install, correct?

Is there any way to edit the output after install by modifying a subs file or something?

Prima32, nvm my friend. I found it in Subs-Post. Thanks for all of your help!

[Xarcell]

Here are some better images to use with it...

[Arantor]

Yeah, sorry my original images sucked so bad.

[Xarcell]

I have a suggestion for whoever is keeping up with this mod. Use

Code Select Expand

class="diceroller" instead of

Code Select Expand

style="font-size:x-small; background-color:#ffffff; margin:5px 20px; border:1px dashed black; filter:alpha(opacity=50); opacity:0.5;"

This way it will look better in custom theme, and no special effect in default theme. If the admin wishes to style it, he/she can simply add it to the index.css.

Thanks.

[Michael Pfaff]

Here are some better images to use with it...

With 2.0, should these be saved in the theme image folder or default?

[Mv.c9]

I have a 2.0.2 version, but when I install the latest version i get the following error:

Code Select Expand

$txt['dice_rolled'] = 'Rolled'; $txt['dice_not_valid'] = 'is not a valid dice string!'; $txt['dice_invalid_both'] = '(cannot be both greater than %d and less than %d)'; $txt['dice_invalid_lower'] = '(cannot roll greater than %d on a %d sided die)'; $txt['dice_total'] = 'total'; $txt['dice_cheater'] = 'This dice roll has been tampered with!'; $txt['bbc_code_roll'] = 'Dice roll';

At the top of all my pages. Am I doing something wrong?

[TheListener]

I have a 2.0.2 version, but when I install the latest version i get the following error:

Code Select Expand

$txt['dice_rolled'] = 'Rolled'; $txt['dice_not_valid'] = 'is not a valid dice string!'; $txt['dice_invalid_both'] = '(cannot be both greater than %d and less than %d)'; $txt['dice_invalid_lower'] = '(cannot roll greater than %d on a %d sided die)'; $txt['dice_total'] = 'total'; $txt['dice_cheater'] = 'This dice roll has been tampered with!'; $txt['bbc_code_roll'] = 'Dice roll';

At the top of all my pages. Am I doing something wrong?

I have locked your similar topic on the 2.0 board.

Any errors on install?

[Cereus]

I'm double posting because I found an error in my repack. I forgot to add the command to "install portuguese".

Hugs.

Arkhan, thanks for the update to 2.0.2. One error I noticed (and maybe something messed up with my install because I uninstalled the old dice roller and reinstalled), but when I click on the dice roller graphic in the new post, instead of popping up [roll][/roll] in the text field, it just does [roll].

Was this intentional? And, how can I adjust the code to make it do [roll] and [/roll] when someone clicks on the graphic?

Yeah, for sure! I'll try to solve it.

Done! ASAIC!!

sigh... .sigh...
Tags

Dice Roller traduzido para português (pt-br).
Dice Roller translated to portuguese.

[Mv.c9]

I'm double posting because I found an error in my repack. I forgot to add the command to "install portuguese".

Hugs.

Arkhan, thanks for the update to 2.0.2. One error I noticed (and maybe something messed up with my install because I uninstalled the old dice roller and reinstalled), but when I click on the dice roller graphic in the new post, instead of popping up [roll][/roll] in the text field, it just does [roll].

Was this intentional? And, how can I adjust the code to make it do [roll] and [/roll] when someone clicks on the graphic?

Yeah, for sure! I'll try to solve it.

Done! ASAIC!!

sigh... .sigh...
Tags

Dice Roller traduzido para português (pt-br).
Dice Roller translated to portuguese.

Thanks, but I still get this at the top of my theme;

$txt['dice_rolled'] = 'Rolled'; $txt['dice_not_valid'] = 'is not a valid dice string!'; $txt['dice_invalid_both'] = '(cannot be both greater than %d and less than %d)'; $txt['dice_invalid_lower'] = '(cannot roll greater than %d on a %d sided die)'; $txt['dice_total'] = 'total'; $txt['dice_cheater'] = 'This dice roll has been tampered with!'; $txt['bbc_code_roll'] = 'Dice roll';

any ideas where is it coming from?
This is the forum: hxxp:forums.bloodlinesantitribu.com/ [nonactive]/index.php

[Cereus]

What happens in default theme?